Radio-wave Probing Systems
m&h Radio-wave Probing Systems
m&h radio-wave probes are touch trigger probes. When approaching a workpiece surface, the stylus deflects and a trigger signal is transmitted to the receiver by radio wave. This receiver converts the radio waves to an electrical signal sent to the control. Interference-free signal transmission between probe and receiver is absolutely vital for process-reliable measuring on machine tools. Radio transmission is effected in the 433 MHz frequency band being internationally approved and providing particularly high penetration. 64 channels can be easily adjusted on the digital display both on the probe and the receiver. The patented SCS (Self Channel Select) technology of the microprocessor-controlled receiver responds to interference signals by continuously checking the environment. The receiver will block corrupted frequencies from further use and will suggest the best alternative frequency. Combining these two technologies ensures process-reliable radio transmission.

Radio-wave Touch Probe RWP20.41

The touch probe RWP20.41 has been designed for complex measuring tasks. Modular extensions enable measuring inside the workpiece or in deep cavities. The freely adjustable trigger force allows both triggering on very thin-walled workpieces at minimum trigger force and the use of heavy cross probes at maximum force.

» mais
m&h Radio-wave Touch Probe RWP20.50

m&h RWP20.50 radio-wave touch probes are available in two different frequency ranges. As a technology pioneer, m&h long ago introduced the first reliably functioning probe with radio-wave transmission of the measurement signals onto the market. The industrial frequency band of 433 MHz is still used today for reliable transmission of time-critical signals. The new radio-wave touch probe is still compatible with existing equipment in  the available 433 MHz version. Alternatively to this, the new m&h RWP20.50 radio-wave touch probe is also available with a new radio transmission technology in the frequency range of 2.4 – 2.4835 GHz.

» mais
Radio-wave Touch Probe RWP38.41

The compact radio-wave touch probe RWP38.41 has been specially designed for machines with limited available space. It is ideally suited for use on machine tools with limited maximum tool diameter and limited Z-travel, particularly with 5 axis heads. It can be extended using modular extensions and is ideal for complex measurements.

» mais
Temperature Probe RWTP20.44

The temperature probe RWTP20.44 is intended for use on large machining centres and 5-axis machines when infrared transmission is not sufficient. It acquires, fully automatically, the part temperature before and during the machining (patented). This enables improved control of the production process and tuning of machining parameters during ongoing production. Temperature-dependent parameters can thus be determined with certainty before the part is taken to the next machining step with a tolerance specification, ensuring a uniformly high manufacturing quality.

» mais
Radio-wave Tool Setter RWT35.50

The Radio-wave Tool Setter RWT35.50 for vertical lathes, large milling machines and machining centers enables variable positioning of the tool setter, to fit the task at hand. Through use of a magnetic mount, the tool setter can be placed in wide range of table positions. Our patent pending system delivers highly accurate and repeatable re-positioning of the tool setter. With wireless operation and no permanently fixed hardware, use of the RWT35.50 does not restrict or interfere with the machining area in any way. Now tool measurement can be done flexibly with a single instrument, including in machines operating with alternating machining stations.

» mais
Radio-wave Receiver RWR95.40

The compact radio-wave receiver RWR95.40 communicates with all m&h radio-wave probes, including the temperature probe. It is sealed to IP68 and can be mounted anywhere in the machining area with ease. Measurement and temperature data are transmitted using the high-penetration transmitting frequency of 433 MHz. While in operation, the environment is continuously checked for interference from transmitters (SCS). Corrupted channels are blocked, non-corrupted displayed for use making it easy to adapt to varying radio conditions.

» mais
m&h Radio-wave Receiver RWR95.50

The compact radio-wave receiver RWR95.50 communicates with m&h radio-wave touch probes in the 2.4 GHz range and can be easily mounted in the machine room.

» mais

Print Print